Kluge EHD 14″ x 22″ Die Cutter Foil Stamper. Able to run a large variety of stocks with reliable feeder and excellent registration. Upgraded electrical controls, well maintained. Comes with full size heat plate, honeycomb and hardened plate for die cutting. For a short video click on the link https://www.youtube.com/watch?v=rP2jJ-jczR0
Imperia 22″ x 30″ die cutter is equipped with electric clutch, heavy duty drive and safeties. The press is in excellent working condition. Comes with a chase for fast set up. Does an excellent job on small format projects.
1994 WUPA PS 4.4 die cutter in excellent working condition.
Max.Size:112 x 80 cm (44 x 31 inch)
WPM AUTO DIE CUTTING MACHINE
• Size : 80 x 112
• Speed : 7500 p/h
Machine with 2 chases and 2 frames and with many stripping nails and parts
This 1995 Bobst 160 Vision Die Cutter has an extremely low – only 8,900 impression count.
This is a very clean press in exceptional good working condition. Will handle solid board, practically all types of corrugated board and semi rigid plastics.
Corrugated board 0.75 to 9 mm
Corrugated flute type A, B, C, D, E, F, G, N, O,
AB, AC, BC, EB, EF, Triple wall
Solid Board max 9 mm
Semi-rigid plastics max 9 mm
Sheet size min 400 x 600 mm max 1100 x 1600 mm
Speed 4500 s/h
Cutting size max 1075 x 1600 mm
Gripper margin 11 to 18 mm
Height of cutting rules 23.8 mm
1968 Bobst SP 1260 is equipped with an Eagle foil system and heat plate. The Eagle system was installed in the late 90’s and it is in excellent working condition.
The press may be inspected in operation.
2011 Bobst VisionCut 1.6
Max sheet – 62” x 43”
Min sheet – 23.5” x 15.75”
Max speed – 4,800 sph
Max pressure – 600 tons
Gripper – 11 to 18mm
Corrugated board up to triple-wall
Under power, can be tested
1994 Bobst SP102 SE die cutter has less than 9,000 operating hours.
The press is in excellent running condition.
May be inspected in operation.
19784 Bobst SP 102 E Autoplaten Die Cutter available in excellent
Loaded with many useful features this press may be inspected in
This is a heavy duty machine with approx 700 tons of cutting pressure. Owner states will cut 3/16 Masonite, 90 pt and 120 pt chipboard, B and C flute corrugated without issue.. This would be great for the Automotive hard board industry. Sheridan 45 x 65 Die cutting tonnage – 700 tons Max/min. sheet size 45 x 65 max, 20 x 20 min Chain and gripper bar feed Number of gripper bars = 5 Gripper margin ¼” to ½” all depending on the gripper bite allowed.
Late model Thomson Die Cutter 38″ x 54″ equipped with dual mics, variable speed drive, pneumatic clutch, dwell, hardened steel plate, operators console and safety cage. The press is under power and in excellent working condition.